OUTPUT MODULE FAN - Marshall™ MG SERIES AMPS -
PREMIUM TYPE (BALL BEARINGS), HIGH AIRFLOW, LOWER NOISE
Fits many of the Marshall™ MG100DFX, MG100HDFX, MG50DFX and the MG250DFX models. IMPORTANT
NOTE: Does NOT fit the MG50FX, MG100FX, or MG100HFX models -
these are the models with the large "MG" on the front panel. Check model
number carefully. Note: Check
size of the old fan. If the old fan is 2" x 2" x 3/8", this is the
correct fan. Some Marshall™ versions of the MG100DFX, MG100HDFX,
MG50DFX and the MG250DFX used a larger fan (2 3/8" x 2 3/8" x 1").
If your amp has the larger fan, order the OD6025-12, below. 12 volts DC, 1.10 Watts,
5000
RPM, 11.0 Cubic Feet/Minute Airflow, 26dBA Noise. Comes with 12" tinned leads - cut off and splice connector from original fan. Ratings: Reliability: A, Airflow: A,
Noise: A-, Price: B- Part #OD5010-12
Installation video for fan:
$23.95
Click on photo for
larger view
OUTPUT MODULE FAN - Marshall™ MG Series
PREMIUM TYPE (BALL BEARINGS), HIGH AIRFLOW, LOW NOISE
Fits some versions of the Marshall™ MG100DFX, MG100HDFX, MG50DFX and the MG250DFX models. IMPORTANT
NOTE: Does NOT fit the MG50FX, MG100FX, or MG100HFX models -
these are the models with the large "MG" on the front panel. Check model
number carefully. Note: Check
size of the old fan. If the old fan is 2 3/8" x 2 3/8" x 1", this is
the correct fan. Some Marshall™ versions of the MG100DFX, MG100HDFX,
MG50DFX and the MG250DFX used a smaller fan (2" x 2" x 3/8").
If your amp has the smaller fan, order the OD5010-12, above. 12 volts DC,
1.70 Watts, 3500
RPM, 18.0 Cubic Feet/Minute Airflow, 27dBA Noise. Comes with 12" tinned leads - cut off and splice connector from original fan. Ratings: Reliability: A, Airflow: A,
Noise: B, Price: B Part #OD6025-12
$19.95
Click on photo for
larger view
ECONOMY OUTPUT MODULE FAN - Marshall™ AVT SERIES AMPS.
SEALED SLEEVE BEARINGS
Fits only the Marshall™ AVT50, AVT100, AVT150 and AVT275 models. This is
the newer style 1cm thick version, which replaces the older style 2cm thick
type. 40mm x 40mm x 10mm. 24 volts DC, 1.4 Watts, 6000 RPM, 6 CF/M Airflow,
25dBA noise rating, sealed sleeve bearings. Comes with tinned leads - cut off and splice connector from original fan. Part #OD4010-24SS
$10.95
Click on photo for
larger view
QUIET PREMIUM OUTPUT MODULE FAN - Marshall™ AVT SERIES AMPS.
DUAL BALL BEARINGS Fits only the Marshall™ AVT50, AVT100, AVT150 and AVT275 models. This is
the newer style 1cm thick version, which replaces the older style 2cm thick
type. 40mm x 40mm x 10mm. 24 volts DC, 1.4 Watts, 4800 RPM, 6 CF/M Airflow,
20dBA noise rating, dual ball bearings. Comes with tinned leads - cut off and splice connector from original fan. Part #OD4010-24MB
$20.95
Strat™, Stratocaster™, Esquire™, Telecaster™, Tele™, Jazzmaster™, Jaguar™, Mustang™, P.Bass™, J.Bass™ and Fender™ are registered trademarks of Fender™ Musical Instruments. The replacement necks and bodies are for a Fender™ or Squier™ by Fender™ guitar or bass. The distinctive headstock designs and the distinctive body designs of the Stratocaster™, Telecaster™, J.Bass™, P.Bass™ and Tele™ Bass are registered trademarks of Fender™ Musical Instruments Co.
Peavey™ is a registered trademark of Peavey™ Electronics Corporation.
Marshall™ is a registered trademark of Marshall™ Amplification Plc.
Mesa Boogie™ is a registered trademark of MESA/Boogie™ Ltd.
AmpRepairParts.com and Studio Sound Electronics are not affiliated with these companies.
All company names, logos and product names mentioned on these pages are trademarks of their respective owners.
WARNING: These products may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.